Return to the Fireplaces Forum | Post a Follow-Up

 o
Harmon 3 blinking lights

Posted by gelson (My Page) on
Sat, Dec 21, 13 at 19:14

I have a Harmon pellet stove insert (not sure of the make). The status light blinks 3 times and the auger stops feeding even though the feed light is on. If I unplug it and plug it back in it will usually reset and work. Sometimes I will less than gently close the lid and this gets it to start feeding again.

Any ideas what the 3 blinking lights mean and what could be causing the feed issue.
Thanks


Follow-Up Postings:

 o
RE: Harmon 3 blinking lights

Does the heat go out or smolder? check dip switch settings, see if you can get it to feed faster with on, off,on.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here