Return to the Fireplaces Forum | Post a Follow-Up

o
Harman p68 Draft

clip this post email this post what is this?
see most clipped and recent clippings
Posted by JonPB (My Page) on
Mon, Dec 12, 11 at 16:52

Hi all
Just installed a P68 today. The stove seems to be working fine, but from my understanding the fire line should be an inch from the edge of the burn pot. My stove doesn't seem to be pushing any ash out of the fire pot, the burning is taking place very close to the auger, and most of the ash is just flying around in the stove.

I adjusted the draft voltage all the way down (counter clockwise) and it seems to still run fine even on low flame. Is there a way to further restrict the amount of draft air?

Thanks for your help I am brand new to this pellet thing. :)

Follow-Up Postings:

o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Fireplaces Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.