Return to the Fireplaces Forum | Post a Follow-Up

 o
convert LP to Natural Gas

Posted by flyweed (My Page) on
Sun, Dec 20, 09 at 13:18

HI all...I am just wondering what I Need to convert my LP direct vent fireplace to using Natural gas? My fireplace is a Vanguard model VT32P

Minimum inlet supply pressure 11" w.c.
Manifold pressure 10" w.c.

Output rating Max 11,050 Btu/h
Input Rating (0-4500ft) Max. 17,000 Btu/h
Min. 11,000 Btu/h

Also, my next question is size of copper tubing to use on the run from my gas meter to the fireplace? The run is 25 feet..can I just go with 1/2" ID tubing, or should I use 3/8" tubing??

Any advice on the natural gas connection would be great. Thanks

Dan


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here