|
Tue, Dec 11, 07 at 11:17
| A direct vent gas insert we had installed into our prefab fireplace did not take into account that the firebox is raised about 5.5" to provide air intake for the old blower. The custom black cast iron surround provided by the manufacturer looks great above, on the right and one the left. But have this gapping ugly exposed vent below the firebox. We need to cover it with black metal that blends in with the surround. The installer has so far not come up with an acceptable answer. Any suggestions on how we might deal with this (hopefully at a reasonable cost) would be appreciated. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Fireplaces Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.