|
Mon, Dec 20, 10 at 8:45
| I installed a Heat-n-Glo 6000GLX with wall mount control 4 years ago. Has been trouble free till this year. Actually problem may have started last year where the flame would light then flame out in 3-5 secs. IT would then re-ignite and stay on. Not a big apparent problem so nothing done. This year same starting issue, have been using for about a month of our heating season but now there is an intermittent buzzing noise, sounds like a stuck solenoid sound. Turning the fireplace off and on will stop it but it returns in shorter and shorter periods of time now and the buzzing sound is getting louder. Any thoughts to help with the trouble shooting are greatly appreciated. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Fireplaces Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.