Return to the Fireplaces Forum | Post a Follow-Up

 o
hearthatone wood stoves factory defects in material and service

Posted by RyanFuller (My Page) on
Thu, Oct 10, 13 at 14:50

I recently purchased a hearthstone homestead wood stove. At the time of the 3rd use 2 side tiles broke and may now allow carbon monoxide gas to pass through the stove. I called the dealer and the factory for a month without a single solution offered other than "pay freight, package and ship your stove to us [ 3,000 miles away ] and well take a look at it" approach. If their are other consumers out there that have purchased a hearthstone homestead or similar product and have also found the factory unreasonable and unable to stand behind their product I would like to hear from you. These 2 broken tiles are at the bottom of the stove. The cracks on one side are severe. Do any of the know of a good product that could be used to seal this defective device so I can still heat my home safely this winter? Other issues with the install from Country Homes Power is Spokane Washington include, 40 minute burn times [ the factory states this is due to an overdraft issue] This is a hearth mounted stove and I would love to purchase a stove that will not only heat my home but do so in safe and efficient manor. Any suggestions? The heat out put of the hearthstone stove is no where near that of which is advertised.


Follow-Up Postings:

 o
RE: hearthatone wood stoves factory defects in material and servi

If I were you I would find another Hearthstone dealer in your area and tell them, in a calm, professional way, what your problem is.

Your short burn time is indeed because there's too much draft. Your flame should be a nice, lazy, flame.

Who installed it? There might be your problem. Did the installer mishandle the unit causing the damage? The installer is the very first person I would look at regarding any broken pieces and improper draft.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here