Return to the Fireplaces Forum | Post a Follow-Up

 o
Harman P68 Error code Resolution

Posted by gtj811 (My Page) on
Sun, Oct 16, 11 at 4:51

Great information for the pellet stove owners. Recently purchased and installed a Harman P68 pellet stove to replace the Englander unit that worked well for years. Hooked up the stove and ran it for the first time this season. It worked well but I smelled a bit of smoke so I sealed the exhaust with silicone. Now when I start it, within 10 seconds, the error code starts flashing 3 blinks. Looked in manual and it says the ESP needs attention. Removed the ESP probe and cleaned it. It was not dirty. It still flashes the 3 code and I've unplugged the unit multiple times to reset. Any ideas on what I can check next? Thanks in advance. Gregg


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here