|
Sun, Sep 4, 11 at 22:19
| Pellet stove: Quadrafire 1200i
Convection fan will not come on,feed,fire okay Have installed a new 170 deg # 1 limit switch, (nothing) Have installed a new 145 deg # 1 limit switch, (nothing) I am using a by pass wire on the two purple wires that connect to the #1 limit switch, this works perfectly and turns on the convection fan, at the end of the time I want to shut down the stove after it has cooled for about twenty min, I disconnect one end of the by-pass and this shuts off the convection fan. Can somebody help to clue me in on what is taking place with this problem. could it be the thermocouple not reaching the proper temperature? Thanks, Any idea will be greatly appreaciated to address this issue. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Fireplaces Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.