Return to the Fireplaces Forum | Post a Follow-Up

Need advice on enlarging hole for co-linear pipe for gas fireplac

Posted by adriantwpmi (My Page) on
Wed, Sep 4, 13 at 17:48

I want to convert my wood burning fireplace into a gas fireplace. The problem I have is my chimney goes up about 4ft via masonry brick with slotted vents then angles to a pipe going through the roof. Problem I have is the two 3 inch co-linear pipe will not fit through the masonry brick slots shown in the pic attached. Somehow I have to enlarge the slots to accommodate the co-linear pipe for the gas fireplace. Any ideas/recommendations? DW

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here