|
Fri, Sep 17, 10 at 14:22
| Hi, I have an ugly fireplace in my 1950's ranch. It sticks out from the wall: 5 inches above the mantle, 9 inches below the mantle, and the hearth is about 20 inches. Can I take off the brick so my fireplace will be flush with the wall? What does that entail? Please share any pictures if you have done the same. I've put the photo in a link, can't figure out how to get it in this message.
Thanks! |
Here is a link that might be useful: Fireplace
Follow-Up Postings:
|
| Here is the photo:
|
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Fireplaces Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.