Return to the Fireplaces Forum | Post a Follow-Up

Harman Pellet Stove: 'Advance'

Posted by chip618 (My Page) on
Sun, Aug 10, 08 at 12:30

Hi All,
I am considering a Harman "Advance" stove to put on my hearth that is limited by a depth of 20". this stove will fit on the hearth which is raised, as a fireplace insert from Harman is not available. I do have access to a Lennox "Winslow" insert but I think the BTU's are rated at 38,500 where the Advance is rated at 48000 BTU's my home is a new colonial roughly 3500 sq ft, very open with a cathedral ceiling in the room I plan to use and a balcony also in there looking into the family room and allowing what I believe to be natural convection to occur, as it opens up and then travels down the 2nd floor hallway.

Does anyone have experience with either of these stoves and what can I realistically expect as far as performance.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here