|
Thu, Jul 19, 12 at 14:11
| We just did Natural Stone tile around our Fireplace (plz refer the below link). We went with a light shade as we wanted to make it look focus between huge wood bookshelves. It was almost in the finishing stage and GC applied some Enhancement sealer on top of it and it looks so dark that we hate it now. We asked him to remove it and he tried some thinner and seal remover, didn't work.
Is there any way to remove the sealant without causing damage to the tiles? http://www.lowes.com/pd_354393-93840-20-616_0__?productId=3477519&Ntt= tiles+on+the+wall&pl=1¤tURL=&facetInfo= |
Follow-Up Postings:
|
- Posted by SM_Jeff123 (My Page) on Wed, Jul 25, 12 at 19:26
| Contact the manufacturer of the sealer. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Fireplaces Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.