Return to the Fireplaces Forum | Post a Follow-Up

 o
Covering Up Chimney Flu

Posted by debbievan (My Page) on
Sun, Jun 15, 08 at 22:15

We are doing a kitchen renovation and have removed the woodstove that was in the kitchen - it was not useful, it worked so well, it was too hot to stay in the kitchen!
Anyway, the flue pipe went into a brick chimney that has two other flues, one for the main fireplace in the greatroom on the other side and one for a woodstove in the basement. We have plugged the hole where the stove pipe entered the brick chimney flue with a metal cap. A square section of the brick was open to the room (and framed with wood molding). We need to sheetrock the entire wall, because the brick is flush with the current sheetrock.

Are there any other things we need to do before we cover the bricks/capped flue with sheetrock?
thanks


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here