Return to the Fireplaces Forum | Post a Follow-Up

LPG Modern 6ft vented fireplace

Posted by napavines (My Page) on
Fri, Feb 19, 10 at 20:50

Hi Building a new home in Napa area and we would like to have a vented LPG fireplace 6ft long 20" deep with a 18" opening. "Spark" and other manufactures have this product but outrageously expensive $6k - $10k per unit. I have found a site that can supply the burners pans, regualtors all for way under $1000 ( All is good except (i) not sure sure how to build find as firebox - will likely have a local mason build a masonry (yellow brick box) and (ii) was told that under Title 24 (Cal. energy code) would need to have glass over the openng and exterior air vent
I definitely have seen new construction with these types of modern fireplaces open without glass on openings. Any insight help on either point welcomed.



Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Fireplaces Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here