My Harmon Accentra stove stopped working due to a blow fuse. Replacing the fuse did not solve the problem. I tested the auger motor and it was fine. I then realized that disconnecting the distribution blower motor would prevent the fuse from blowing. I replaced the distribution blower motor. Now the stove does not blow fuses, but does not work. However if I switch the hi/low distribution blower speed range switch to HI it will again blow the fuse.
So with the switch on low, I can plug in the fireplace. All lights will come on, no staus lights flash, the distribution blower turns very slowly, but nothing else happens. When I switch the feed adjuster to test the distribution blower blows correctly, but the auger never turns. By the way I also replaced the pressure switch as well.

Any ideas?