|
Wed, Dec 10, 08 at 20:35
| I have a Proform 625 that has been acting up. When you step on the belt, the motor is sluggish and stops. At first, i thought it was friction. Replaced the belt. No good. I have replaced the motor, but that did not help. It appears as if the motor is not getting enough juice to run. I removed the top cover, removed the drive belt, and can stop the motor drive wheel with my foot with very little effort when i demand a speed. The Cur Lim light on the MC60 board lights up when this happens..... Advice????
thanks in advance, tim |
Follow-Up Postings:
|
- Posted by iloveexercise (My Page) on Thu, Dec 11, 08 at 21:28
| Do you have a warranty? We bought ours at Sears and had free maintaince on it for two years.Perhaps you could try contacting the company that manufactor and see if it is known for this problem? I'm not very mechanical,so sorry I dont have better advice. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Exercise & Nutrition Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.