Return to the Renewable Energy Forum | Post a Follow-Up

 o
Thermal Mass Flooring

Posted by cathycdk (My Page) on
Fri, Dec 8, 06 at 23:05

Hi,

New to passive solar heating and cooling, trying to learn!

What materials for flooring besides brick and tile would be a good thermal mass?

Thanks!


Follow-Up Postings:

 o
RE: Thermal Mass Flooring

Hi,

Concrete, adobe, ... most things that are dense.
Dark colors absorb better, but middling colors do pretty well also.

Wood floors will store some heat, but not as much as the materials above. Carpet is probably the worst.

Solar energy that comes through a window will nearly always end up getting absorbed somewhere in the room. If it gets reflected off the floor that it hits first, then it will likely get absorbed by the wall or ceiling -- so you don't lose the heat.
The advantage of having a dark and thermally massive floor is that the floor will absorb a lot of energy and then give it back later in the day after sunset. If you have a lot of south facing glazing, then this not only stores heat for later, but also prevents overheating during the sunny part of day. But, if you don't have so much south facing glazing, then a normal room without a lot of added thermal mass still has enough thermal mass not to overheat. Most of the rough rules of thumb say that you can go up to about 6% of your floor area in south facing glazing without worrying too much about adding thermal mass.

One of the most important things to think about in passive solar heating is that windows gain a lot of heat during the day, but also lose a lot at night. You can greatly improve performance by providing some form of night insulation for the windows (thermal shades, ...).

You might want to try looking through some of the design guides at the link I attached. The Chiras book thats listed there is (I think) also good place to start.

Gary

Here is a link that might be useful: Passive solar home design guides


 o
RE: Thermal Mass Flooring

Thank you for your reply. We are considering buying an earth berm home with passive solar heating that is for sale in Wyoming. It was built in 1983 and has all original decor, so it needs some updates. We're trying to research what our options are for materials that won't negatively impact energy efficiency.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Renewable Energy Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here