|
Sat, Oct 20, 07 at 21:50
| I have two WaterFurnace units in my home. Both were just put in service although they were installed a while ago.
In one unit, when the compressor relay kicks in, it is an almost inaudible little click. But in the other unit, it is about a second of relay buzzing, a visible arc, then the unit runs normally after that. Does this sound like a bad relay or some other problem? Any advice appreciated. |
Follow-Up Postings:
|
| Sounds like you have bad relay contacts, but there may be other things going on too. Have your installer out to check things out. IMO SR |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Renewable Energy Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.