Return to the Renewable Energy Forum | Post a Follow-Up

 o
Generator help

Posted by trebby91 (My Page) on
Sat, Sep 22, 12 at 11:44

Hi,All.
I live aboard a boat.
All I really wanted to know is would a 3 HP. diesel engine (3000 RPM) run a car alternator, what speed the alternator needs to run and what is the highest amp alternator would the engine run and would I be able to run the pulleys at 1 to 1?
The idea is to run the generator instead of the main engine to top up the batteries and save on main engine hours when not cruising.
Regards, Brian.


Follow-Up Postings:

 o
RE: Generator help

You might want to post this in Electrical wiring. There is more activity there and the practical knowledge might be better there as well.

The short answer is yes. 3 hp translates to about 2240 watts. A generously -sized alternator from a large car can run up to 2500 watts.

The details are more involved. There are lots of different automotive generators. They vary in size and in the rpm required for peak output. Some get higher output at lower RPM and that is what you want. If you dig, you should be able to get output vs. rpm curves for some alternators. That will help you decide if you want 1:1 drive. I expect you will want the alternator at a higher rpm than 3000. Note that in some newer vehicles the alternators are controlled from the main computer rather than an integral or separate voltage regulator.

Here are a couple of examples you can see if page down. Note that the 2004 alternator is controlled by the vehicle computer so you can't easily use that.

http://www.pantherfreedom.net/techlib/article22.html

An alternator designed for ambulance or other similar use might give you higher output and at low RPM. You might be best off with the engine being the limiting factor. If you overload the genet, the engine will bog down. If the alternator is limiting, the engine might spin happily while the alternator burns up.

Here is an idea. Call some automotive electrical specialist shops and see if they can fix you up. If you can find one that likes to do custom applications rather than just fix things up the way they were, you will be in luck.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Renewable Energy Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here