Return to the Renewable Energy Forum | Post a Follow-Up

Any suggestions for geo thermal contractors in northern NH

Posted by perlfather (My Page) on
Sat, May 29, 10 at 10:31

I want to install a closed loop geothermal system with radiant floor heating (new house) in northern NH (close to Bretton Woods) and am not having a lot of luck locating knowledgeable contractors to drill the holes install heat pumps etc. Any suggestions?
(I am hoping for Rehau for the radiant floor, Waterfurnace or Climatemaster)

Follow-Up Postings:

RE: Any suggestions for geo thermal contractors in northern NH

Try navigating the link below or contacting the manufacturers directly.


Here is a link that might be useful: IGSHPA, International Ground Source Heat Pump Association at Oklahoma State University

RE: Any suggestions for geo thermal contractors in northern NH

Go to the waterfurnace website and see if it lists any dealers in your area. I found mine that way, but I chose one of its master dealers figuring he had more experience selling, installing and servicing them. I then asked for and checked the dealer's references. All checked out perfectly, and I've been very pleased with my system.

I got my driller independently after seeing him being recommended for a large commercial job by someone on a forum. Turned out to be a good lead.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Renewable Energy Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here