|
Wed, Dec 21, 05 at 16:09
| I need help on how to use metallic thread in a machine embroidery sewing machine. I have tried using a metallic needle with a long eye, slowed my speed down but I still get the thread to bunch up under the garment. You can hear the bobbin case making funny noises and then the metallic thread is looped underneath. Any help would be appreciated. thanks |
Follow-Up Postings:
|
- Posted by Joansews4u (My Page) on Wed, Dec 21, 05 at 23:19
| You may need to change your tensions & put "Sewer's Aid" on the thread. I have heard of people putting a soft sided Velcro adhesive dot in the thread path. They put Sewer's Aid on that dot & as the thread passes over/through it, it gets applied to the thread automatically. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.