|
Tue, Dec 19, 06 at 12:41
| I am new to machine embroidery. Hubby bought me a new Husqvarna 950E. Does anyone else own one (or the 955E)? Do they like it? Any special tips? The HV 3D software is so expensive, however, Embird and the Ultimate Box does not copy to the D-cards used in these machines. Anyone found a way around that? Any user-friendly software to digitize and such that copies to D-cards other than the pricey HV 3D Pro System? Many thanks for any assistance from a beginner! |
Follow-Up Postings:
|
- Posted by stitcheasy2003 (My Page) on Wed, Dec 20, 06 at 8:17
| hi You can buy the 3D Organizer that is less than $160.00. It puts one design at a time on the d-card for your machine. Does your machine also take a reader/writer? my does PP. and that is alot more to buy. You need one of the software programs of hus. because embird does not read or send the d-card to your machine and to transfer your design to the card. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.