|
Thu, Nov 1, 07 at 22:11
| I love my Brother PE-150. I have had it for several years.
I was almost finish with a lace embroidery pattern and the bobbin gave out of thread. I did what I normally do, but the machine has not work correctly since. THE MACHINE WILL NOT PICK UP THE BOBBIN THREAD. I've tried everything according to the book!! Can anyone make a suggestion as to what the problem might be? The nearest authorized service center is 150 miles. Thanks, Peg |
Follow-Up Postings:
|
| Peg, my serger does that if the needle isn't in all the way. Did you check to make sure it's securely in place? Sometimes they come loose from the machine's vibration. The only other things I can think of are to make sure there's no little thread trapped in the bobbin area, make sure it's threaded correctly and that the presser foot is down. Donna |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.