|
Sat, Nov 10, 07 at 16:50
| I have a Brother PE150 embroidery machine. My problem is it won't stich. The pattern is selected on the machine, the thread is in but it won't stich. It comes back with the upper or lower thread ir cut. Does anyone have any ideas what the problem is?
Also does anyone know how to clean this embroidery machine and where the senor is and how to clean it? Thanks |
Follow-Up Postings:
|
| Is the PE 150 an embroidery only machine? I have a Brother combo machine, and it won't embroider with the foot pedal connected. The only other things I can think of are to make sure the presser foot is down and the hoop is attached to the arm correctly. Have you tried another embroidery design? Maybe there is something wrong with the design you're using. Donna |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.