Return to the Embroidery Forum | Post a Follow-Up

 o
Help with Programmable Card

Posted by roewe (My Page) on
Tue, Oct 12, 04 at 17:06

I was uploading some Christmas designs on my programmable card on my husqvarna reader/writer (which I successfully did about a month ago) This time however, it goes through erasing memory and all, but comes on and says "cannot write to card" Then when I go to download or read what is on the card, it says, " Data on card is corrupt; redo. I have redo=ed it 3 times and same thing over and over. Is my card worthlessly broken?

Thanks for all this knowledge you all share. Susan


Follow-Up Postings:

 o
RE: Help with Programmable Card

The design could be corrupt and why it's not downloading correctly. Your card and software apparently is protecting itself from being corrupted.

I usually virus scan the free designs I download on CD after a downloading session (small hard drive) to make sure the designs aren't corrupt even though my anti-virus software is on when I download.


 o
RE: Help with Programmable Card

Is the design you're uploading in the correct format for your machine? You may have to contact your dealer or the manufacturer.


 o
RE: Help with Programmable Card

I am not that computer savvy and had a similar problem a few years ago. I took the programmable card to my dealer and they did what was necessary to clean it up.
If you have bought machines and software from your dealer there should be no charge for that sort of service.

Pat


 o
RE: Help with Programmable Card

Try easing the card and put another design on it. Maybe it is just that one design.


 o
RE: Help with Programmable Card

I had a corrupted card too. I do not have the same brad of machine - mine is a Pfaff. When I called the dealer, he had me reformat the programmable card (the same procedure you follow for a new programmable card). Check your manual for this procedure.

Good luck


 o
RE: Help with Programmable Card

I have the same machine as you do and have had the same problem. Try shutting the computer down, then plug into the USB port. Then try downloading the design. This is what I had to do. Right now, my dongle is missing so I can't help any further. Hope this works for you


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Embroidery Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here