|
Tue, Oct 20, 09 at 1:22
| I have had my machine less than a month. The embroidery arm fell down froma table today and when I put it on the machine to embroider something it seemed to work well but it would not embroider. I calibrated the arm with the hoop on. I then took off the hoop, shut down the machine, and retried it several times, but it kept giving me this message: "slide off hoop. Clear embroidery arm. use presser foot R." Even thoug i followed those directions, it still gives the same message. Is it time for the dealer?
Any input would be appreciated. Ann |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.