|
Mon, Aug 28, 06 at 12:28
| I want to machine embroider a design on a muslin type fabric and then stitch it to the towel ( I have seen this done on towels at Target )and I am unsure about what stabilizer to use. I am also wondering if the excess should be removed. Since the fabric is being sewn to the towel the stabilizer wouldn't be showing anyway. I am very new to machine embroidery and any help or advise would be greatly appreciated. |
Follow-Up Postings:
|
- Posted by islay_corbel (My Page) on Tue, Aug 29, 06 at 2:56
| On muslin, just use a tear away, remove the excess and sew on to the towel. |
|
- Posted by marlene0923 (My Page) on Tue, Aug 29, 06 at 12:14
| Thanks, I'll try that. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.