|
Tue, Jul 18, 06 at 22:41
| Hi
I just got a brand new Singer futura CE 100 machine. I was setting it up and the first thing I noticed that the feed dog does not move (up or down) when I move the feed-dog switch left and right. The feed dog is in the lower position. Is this a problem with my new machine? Thanks for any input. I am a little scared and nervous that my new machine might be broken :-( Rajbala |
Follow-Up Postings:
|
- Posted by stitchntime9 (My Page) on Wed, Jul 19, 06 at 15:30
| If you turn the handwheel the feed dogs should raise if you put the switch in the up position...I thought the same thing. Read your manual page by page first, second, third time. There is a lot of information to digest and also view the video. |
|
- Posted by grandmadeb (My Page) on Tue, Jul 25, 06 at 16:39
| The feed dogs will engage like stichntime said when you move the hand wheel. Just remember that they must be down for embroidery and up for regular sewing. It's easy to forget believe me. Especially when you are jumping back and forth between the two. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.