|
Wed, Jul 18, 07 at 12:09
| I own a Brother machine and have used it very little - can anyone tell me how to embroidery just part of a design?/
The design has 4 parts and I want to skip over a couple - how do I do this? Look at instructions from manuel but I don't get it. Thanks |
Follow-Up Postings:
|
- Posted by gramcrackers (My Page) on Wed, Jul 18, 07 at 23:39
| You will have to watch the design and stop the machine when the part you want stitched is complete. You can then use the +/- button to forward the machine past the part you don't want stitched. You'll probably have to guess about where the next area begins. If you open the design in a program like Bernina's digitizing program, you might can delete certain parts. Good luck! |
|
- Posted by islay_corbel (My Page) on Thu, Jul 19, 07 at 2:53
| You can download a free demo version of a software like Embird and use that to modify the design. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.