Return to the Embroidery Forum | Post a Follow-Up

 o
Memory Card question for Brother SE 270D

Posted by catrina_2006 (My Page) on
Wed, Jun 28, 06 at 21:24

Hi,

I have a Janome 9700 machine that uses a CompactFlash card with an adapter. I just purchased a Brother SE 270D machine and can not find information on the memory card I can use. I have a few questions. Does it only take Brother design cards or can I use the PED Basic to create a card with my own designs? Also, do all brother design cards work on this model. The Brother site doesn't give a lot of information concerning the way to get designs to the machine.

I guess that is what I get for buying the machine on-line rather than a local dealer. I just thought I would be able to find information!

Thanks you any help
Catrina


Follow-Up Postings:

 o
RE: Memory Card question for Brother SE 270D

First of all the two machines take different formats. You might want to consider purchasing Embird that will convert the two formats so that you can use the same design with each machine sans the Disney designs that are propietary to Brother and can't be used on any other machine.

You are correct that you will need a reader writer box for the Brother machine because your machines are different formats. The PED basic sounds like a good plan (available on line at Walmart for around $139.).

I have two different brand machines and also found that the hoops are not interchangeable either. The only things that may be interchageable are feet and needles. The bobbins may be different so you really have to watch which bobbin you have and don't get them mixed up.

I would thoroughly read the Brother manual before purchasing anything further...they are pretty good about documetation and educating if you practice the manual page by painful page.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Embroidery Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here