|
Sun, May 25, 08 at 15:51
| Hi,
I just got a Brother 270D. After rereading the threading instructions several times, I tried a simple 1 color embroidery project. It was a cotton dish towel with some iron on stabilizer. The machine would embroidery fine for a little bit then the upper thread would break. I finally gave up when the thread broke and there was a birds nest under the last bit of stitching. I was certain I had the right needle, although I did have a lot of trouble reading the size even with a magnifying glass. I used Sulky embroidery thread. Any suggestions as to what I might be doing wrong?? |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.