Return to the Embroidery Forum | Post a Follow-Up

 o
Janome 350e Download Help

Posted by sunbmr (My Page) on
Tue, May 26, 09 at 12:32

Does anyone know how to download fonts from a USB stick to use on the 350e? I have no problem downloading designs, but I cannot figure out how to use fonts that I've downloaded from the website in jef format and use them in an embroidery design.


Follow-Up Postings:

 o
RE: Janome 350e Download Help

sunbmr,

I just got the Janome 350 a week ago and had the same problem. Make sure that you format your USB stick before you download from the internet. To do that put the stick in the machine then turn on the machine. You may want to click the USB icon on the screen then turn the machine off. Once you do that, go back to your computer:go to My computer and you should see the EmbF5 folder, double click. Make sure you have your designs saved under my designs. I tried to make folders for mine to organize them a little better, but I wasn't able to.

Hope this helps. Lets stay in touch and maybe we can help each other out.

Crofire2


 o
RE: Janome 350e Download Help

Oh,
can I be included to? :o)

I also just purchased the 350E and wow!
I figured out the memory stick thing and have been messing around with it and adding designs etc. but it is telling me there is not enough memory space when I plug the stick into the machine.
I bought a 4GB stick and figured that would be plenty of room for designs. So I don't know if its the stick or the machine
Anybody know?

Thanks


 o
RE: Janome 350e Download Help

Check with the dealer. When I bought my Janome 350 - I was told that a 256mb was the upper limit for these embroidery machine USB's. It may be that it doesn't recognize all of the 4GB's memory. I've gotten several hundred files on my USB with no problem.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Embroidery Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here