Return to the Embroidery Forum | Post a Follow-Up

 o
embroidery area pe 200

Posted by Marino (My Page) on
Mon, Apr 25, 05 at 16:56

I have a pe 200 and I am trying to use the 5x7 frames,
I made the desing in the PE Design with no problem, but
when I try to load it in the machine, it says that it's
too big.
What is need to be done?


Follow-Up Postings:

 o
RE: embroidery area pe 200

What is the field area of your machine? You may be able to shrink it or you may have to redo it entirely if your machine doesn't have a 5x7 field....like spliting it & sewing it in sections.


 o
RE: embroidery area pe 200

The sewing field on the 200 is only 4 X 4. You'll have to either make your design smaller or split the design.


 o
RE: embroidery area pe 200

OK, thanks


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Embroidery Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here