|
Sun, Apr 13, 08 at 3:31
| I just started using my machine Brothere SE 270D and purchased a memory card. I follow the directions in the manual but when I turned it back on the LCD screen was blank. Can anyone tell me what to do.
Any help is appreciated. |
Follow-Up Postings:
|
| I have brother machines, but not your model. when the machine is on, and the card is inserted, it wont automatically know you want to stitch from the card, you have to select "the Card" from the display. then it will read the card and display the designs |
|
- Posted by cinder_ella (My Page) on Fri, Jun 6, 08 at 0:19
| On my machine, when inserting the card it requires just a little extra oomph to get it to seat. Are you sure you're getting it in all the way? don't force it, but gently make sure it's all the way in. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.