Return to the Embroidery Forum | Post a Follow-Up

 o
BabyLock Ellure embroidery

Posted by sharma_quilter (My Page) on
Sat, Mar 14, 09 at 9:24

I have a 2004 BabyLock Ellure. I have to admit that I have used it only for sewing and quilting, but have to decided to include embroidery in my list of fun things to do. I tried it last night and my needle kept coming loose and dropping out. I have never had that happen during quilting or sewing - but then again, the speed that the embroidery goes is much faster. Has anyone else had this problem?


Follow-Up Postings:

 o
RE: BabyLock Ellure embroidery

I think it is very likely that in the 4-5 years that you have owned this machine, you may have stripped the screw that holds the needle in. I'd recommend that you take it to your dealer to have it checked out. Otherwise, you'll have to stop the design frequently to re-tighten the screw. And if it drops out in the middle of a design it could do some damage to your machine.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Embroidery Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here