|
Sat, Feb 10, 07 at 21:35
| Just got a futura ce100 for valentines day. So very new to machine embrod. If I am doing a design that has multicolors how do i go about changing thread color for each block. Just like normal? stop the machine put new thread in and change bobbin, then start design up again?
thanks so much |
Follow-Up Postings:
|
| Dewrose, I seldom change my bobbin in my embroidery machine. Only occassionaly is it necessary. Most of the time I use white in the bobbin and some people use black or a gray. Your machine should stop when it is time to change thread . Hope this helps. I have only had my embroidery machine about a year but I have had fun with it. Sally |
|
| The machine will stop when the thread needs to be changed, there is a color code imbedded in the design that tells the machine to stop. Try and use white or dark 'bobbin' thread and leave it in. That’s bobbin thread, not sewing thread. Also, use embroidery thread on top, not cotton sewing thread. Rayon (usually a bit brighter, or polyester (stronger, color fast). Good Luck |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.