|
Tue, Jan 12, 10 at 23:10
| Recently, I created a design to place on a pullover 2XL nylon jacket with hood, short zipper and a light weight lining. I tested the design and it worked fine. It was very difficult to place the jacket on the machine (husqvarna viking platinum 950E) after hooping. The shaft on my machine is not very long and the jacket was very bulky in the small area that I have on my machine between the shaft and the rightside. The design became distorted.
Does anyone have any suggestions as to what I can do to correct this problem?
|
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.