|
Wed, Jan 10, 07 at 10:12
| I have just purchased a Simplicity SE-3 and made my first attempt at monogramming. My problem is when doing a three letter monogram, I can't figure out how to make the center letter larger while still using all upper case letters. All I could do was use lower case for the outer two letters to get them to be smaller. Does anyone know how to do this? I have read the manual repeatedly, but can't find anything.
Thanks |
Follow-Up Postings:
|
- Posted by isew4plsre (My Page) on Wed, Jan 17, 07 at 11:18
| Have you tried embroidering each letter separately and not as a single embroidery? You will have to be careful with the starting needle placement in order to line it up correctly but it should work. Lisa |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.