|
| Hi Girls
I know someone here will have an answer - I can hoop my fabric with the hoop, or use the spray for hard to hoop heavy towels. Seems as though my fabric always seems to loosen, even though the screws are tight. I heard there is something that you can put inside the hoop frame to keep it from slipping, can anyone tell me what it is. Is it that rubbery mat that they use for drawer liners, I can't remember but I know I read it somewhere, mayb it was tape, my brain is a little slow today......help
|
Follow-Up Postings:
|
- Posted by joansews4u (My Page) on Sat, Jan 13, 07 at 17:45
| Are you hooping a stabilizer with your fabric? |
|
- Posted by stitchntime9 (My Page) on Tue, Jan 16, 07 at 7:22
| What project are you working on that the fabric slips? Did you tighten the hoop screw up? If you have done hand embroidery, you hoop the same way with the fabric lower rather on top. Refer to your machine manual for suggestions. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Embroidery Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.