|
Sat, Dec 27, 08 at 22:44
| I have a Phillips, HDTV, Rear Projection TV with Chassis Number DPTV305F, it is a 2004, my friend had it and bought a new one when this stopped working so he gave it to me. When you turn it on the power light comes on, the power light blinks when you do anything with the remote, there is no picture or sound except for a continuous "chirping" noise. I attempted to get into the SDM mode to check error codes but of course didn't work with out a picture, I did try to get into the LED error mode but could not get a response that way either. I have purchased the schematics and service manual. I have checked the fuses, the capacitors (for bulging), the board for burn marks etc. Nothing obvious. I do have an electronics degree so not a complete idiot, I hope. lol Not sure being an incomplete idiot helps either. Thanks ahead of time |
Follow-Up Postings:
|
| time to move down |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.