Return to the Electronics Forum | Post a Follow-Up

Phillips 55' 55P916 1004 Problem..

Posted by bgates1985 (My Page) on
Tue, Dec 5, 06 at 19:41

Ok, I can't seem to find ANY information on my tv's model. Not even on the Phillips website, but nevertheless, I seem to have a problem with it. The picture on the screen is like a 3D screen (you know, where you need the glasses to view), much like a rainbow effect. I just turned it on one day and boom, it was like that. The sound works great as it should. Any suggestions as to what could be the cause and how I could go about fixing this?

Follow-Up Postings:

RE: Phillips 55' 55P916 1004 Problem..

You have blown convergence IC's. They both need to be replaced (soldered in) and a convergence alignment done.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here