|
Tue, Dec 6, 11 at 17:27
| I have a v tech cordless phone with two handsets. the problem is with the second handset. the phone rings, I answer it and there is no connection. the affected phone also responds to "locate handset". Obviously, the battery is charged because it does ring. When I try to make a call from handset, there is no dial tone. The main handset is working properly. Please advise. |
Follow-Up Postings:
|
- Posted by yosemitebill (My Page) on Tue, Dec 6, 11 at 19:42
| Does the phone maybe have a "lock feature" to prevent accidental button presses that may currently be turned on? |
|
| I don't believe it does. |
|
- Posted by yosemitebill (My Page) on Tue, Dec 6, 11 at 22:18
| If you don't have the manual, look it up on the V tech website and see if it does have that feature and how to turn it on/off. If it doesn't have that feature, a low (or worn out) battery can usually have enough power to still receive a signal but doesn't have enough power to transmit - which you need to be able to do in order to answer or call out. So, it could still possibly be a battery problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.