|
Sun, Dec 16, 07 at 15:51
| I have read and tried to apply th R3340 resistor fix. I did
find that the resistor was blown open, however the new one (10 ohms 1/2 watt) still left me with gray screen with gray horizontal lines. that is what I started with, I don't have any sound. I belive I have the classic shut off after about five to eight seconds with gray screen and horizontal lines. Can anyone give me any other fixes when the resistor fix don't solve the problem? I am doing this to keep my mine sharp during my retirement so I have time to play. |
Follow-Up Postings:
|
| I Need to correct the model#for the posting above should be 25ts56c221 |
|
| The R3340 was my problem after all, I did'nt do a good job of replacing the new 1/2 watt. I decided to redo the job and got the results that I needed. works great. thanks |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.