Return to the Electronics Forum | Post a Follow-Up

Magnavox Horizontal Scan Going Out

Posted by drlaney22 (My Page) on
Sun, Nov 2, 08 at 22:16

The horizontal scan on my Magnavox 32-inch TV is going out. When first turned on, the horizontal scan doesn't go all the way from left to right and the TV turns itself off. I can turn it back after several attempts and eventually the picture goes normal and stays fine. Turn it off for a while and the problem comes back.

No question a component will evetually fail hard.

Any suggestions and what component and where to find a replacement?


Follow-Up Postings:

RE: Magnavox Horizontal Scan Going Out

time to move down

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here