|
Tue, Nov 4, 08 at 18:15
| I have a used Panasonic telephone system that I need to install. It is a Strata DK-24. Seems to be relatively straightforward - - there are 4 modular jacks for the 4 lines from the phone company, and a 25 pair Amphenol connector to feed the actual phone stations.
Is there any standard as to which of the 25 wire pairs goes to Station 1, Station 2, Station 3...etc? For example would Station be pins 1-4, Station 2 pins 5-8, etc? I found a .pdf file of a manual with installation info but it doesn't detail the individual wire pairs. THANKS! Carl
|
Follow-Up Postings:
|
- Posted by davidandkasie (My Page) on Tue, Nov 4, 08 at 22:33
| you NEED the install manual itself, not just the regular manual. not only could it be a wierd configuration, if you hook up wrong you can blow out the boards or the phones. keep in mind that that amphenol connector mates pairs across from each other. pair 1 is pin 26 tip and pin 1 ring. pair two is pin 27 and pin 2, and so on and so forth. you count the higher pin first, as that is the top wire on teh punchblock. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.