|
Thu, Nov 1, 07 at 17:51
| I am using a no name 4 channel DVR with all four channels being used. Everything works the way it should except for when I want to split the DVR's signal from one TV to multiple TV's.
I have a run of RG6 QS coming from the DVR to the back of a television and everything works great. When I take the cable off the TV, connect it to a splitter and then continue from the splitter to the same TV I don't have any signal. I've tried a couple splitters, but all of them are for digital TV (5 - 1000MHz). Is the "speed" of the splitter the problem or is it because of the DVR's internal quad processor? I've also tried modulating the signal using NetMedia's MM-70 prior to the splitter, but the results were the same. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.