Return to the Electronics Forum | Post a Follow-Up

phillips dptv305

Posted by mastermodeler (My Page) on
Mon, Oct 2, 06 at 21:17

I have a Phillips dptv305 with a 50pp920217 chassis.
This is a 50 inch rear projection tv and I have a convergance problem. I am an electronics tech repairing regular tv's but with little experiance on projection. The red and green crt's seem to be pretty well aligned except with a slight pulling in on the left side of the screen. The blue crt however seems to be over driving, in other words the blue seems to be shadowing a little to the left on the left side and a lot of shadowing on the right side. making the blue image too big to fit the alignment on the red and green. Any help would be greatly apreciated.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here