|
Fri, Oct 23, 09 at 15:58
| I had to move my Panasonic DVD Recorder. After hooking it back up, I get a split screen when the DVD is on. So now I can not watch a DVD. I have checked the leads and nothing seems to be loose. Any Suggestions as to what my problem might be? How to Fix it? Thanks.
Donna |
Follow-Up Postings:
|
| You have the DVD player video output set to progressive scan. Turn off that feature and it should work. Your TV must not support the 480P input. |
|
| Thanks for the reply. After reading this, I looked and there is a P lit up on the front of the unit. I can't seem to figure out how to turn the Progressive scan off though. I will keep trying, but if anyone can tell me how to do this I will sure be grateful. when I go so far into setup the screen goes blue. Because of the split screen it is difficult to read the on screen instructions. Steve, thanks agin for the help . |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.