|
Sat, Sep 26, 09 at 11:30
|
Dish has a user forum. Most, not all, say most signal strength errors with established setups are a grounding problem.
Dish had grounding problems upon installation four years ago and there were several really annoying service calls. How could I do it myself? |
Follow-Up Postings:
|
- Posted by albert_135 (My Page) on Tue, Sep 29, 09 at 13:57
| Installers say look up the Direct TV site - a ground is a ground is a ground, they say. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.