|
Sun, Aug 23, 09 at 16:23
| I have having trouble with my tv. It is only 3 years old. We can not get it to go to the input selection. So therefore it will not connect to our cable box.
Before yesterday all was ok. Then all of a sudden when we turn on the tv all we get is static. The remote that came with the TV will not put it on the right input. We don't know why the right input is not selected anymore. The tv will work if we connect the cable to the tv, but it will not work when we run the cable through the cable box. The cable man said it was something wrong with the tv. Does anyone have any ideas as what could be wrong and how much it will cost to get it fixed? |
Follow-Up Postings:
|
- Posted by regus_patoff (My Page) on Sun, Aug 23, 09 at 20:05
| It sounds like you're using the single (round) (screw-on) RF connection. Is the Cable Box output and the TV both set to the same Channel ? Channel 3 maybe ? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.